Giới thiệu CẦN SIẾT CÓ CHỈNH LỰC STAHLWILLE MANOSKOP 730 QUICK 100 NM-657215_100
Version: Sturdy compact one-armed torque wrench, adjustable to scale and self-triggering.
The accuracy is sustained for many thousands of operations, because high quality material is used for all wearing parts with stressed parts loaded only briefly on each occasion.
Body and handle are of sturdy square section.
Scales adjustable.
Anti-clockwise tightening by pushing through the drive shankWithout any plug-in head (basic model); see No.
657582 − 657950 for suitable plug-in heads.
Units of measure: Nm, lbfft.
Advantage: Ergonomically shaped two-component handle, resistant to aggressive liquids such as fuel, Skydrol etc.
The adjustment scale is placed behind a sight glass for protection against dirt and damage.
Quick, precise, and reliable setting: Pull the setting knob, “Twist” to set the desired value and “Press” to save it.
Setting knob moves easily since there is no spring pressure to be overcome.
Function: If the set value is reached while using the wrench, the wrench triggers giving a “signal” (acoustic and perceptible) and is then immediately ready for use again.
Application: Since the set torque can be varied, it is ideal for repairs and short series production.
Standard: Tested to DIN EN ISO 6789.
Note: The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
-----------
maximum torque
50 Nm
Direction of tightening
For right and left-hand tightening
Torque measuring accuracy
±3 %
Exchangeable tool
Plug-in head
Test certificate
Manufacturer’s test certificate
Calibration
O1
Series
MANOSKOP 730N
Overall length L
330 mm
Torque range
10 Nm - 50 Nm
Torque range
7 lbfft - 37 lbfft
Scale graduation, 1 graduation =
0.25 Nm
Weight
831 g
Adjusted reference dimension on the torque wrench [l
2]
17.5 mm
Socket for plug-in head
9×12 mm
Display
analogue
Release signalling
akustisk; haptisk
Trigger principle
mechanical short-travel release
Connection format
for plug-in heads (rectangular socket)
Measurement technology
mechanical
Data can be recorded
no
Setting the trigger value
with adjustment scale
Feedback
triggering
Reversible reading
Nm; lbfft
Measurement process
Torque
Adjustable trigger value
adjustable
Standard
DIN EN ISO 6789
Lever length without plug-in head [l
1]
280 mm
Lever length including factory calibration reference dimension [l
3]
297.5 mm
Type of product
Torque Wrench
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....
Giá TREEB